V-belt for CLAAS combine harvesters, part no. 00 0667 452 1 Agrosikora

Technical characteristics of the V-belt for CLAAS combine harvester

The V-belt for CLAAS combine harvesteris a fundamental element of a flexible drive transmission system, enabling effective torque transfer between shafts. Thanks to its wedge-shaped cross-section,the V-belt for CLAAS combine harvesterfits into the pulley grooves and wedges into them under load, allowing for slip-free power transmission. The variant with part number 00 0667 452 1 is widely used in drive systems of CLAAS agricultural machinery, ensuring reliable operation during intensive use.

Location of the V-belt in the CLAAS machine drive system

The V-belt for CLAAS combine harvesteris located at many critical design points of the machine. It can drive main working components such as the threshing drum, straw walkers, or the fan. Furthermore,the V-belt for CLAAS combine harvesteris used in auxiliary drives – including radiator fans, hydraulic pumps, alternator, and air conditioning compressor. In the case of variable speed systems, it can also be part of a variator. The location of a specific belt depends on the combine model and its function within the drive system.

Functions and application of the V-belt in CLAAS machines

The main function served bythe V-belt for CLAAS combine harvesteris the reliable transmission of mechanical power from the engine shaft to the working components. Working in a belt system,the V-belt for CLAAS combine harvesterensures effective torque transmission, dampens vibrations, and at the same time enables relatively quiet machine operation. In the event of an overload, it can undergo controlled slippage, protecting other drive components from damage. Additionally, it supports the synchronisation of cooperating mechanisms, ensuring their efficiency and operational safety.

CLAAS combine harvester models compatible with belt 00 0667 452 1

Part number 00 0667 452 1 refers tothe V-belt for CLAAS combine harvester, which is used in many machine models of this brand. it is found in drive systems of theLEXIONseries – including models 400, 500, 600, and 700, depending on the machine configuration and the belt's function.The V-belt for CLAAS combine harvesteris also used inTUCANO(300, 400, 500) models, as well as in selected designs from theMEGA,MEDIONandDOMINATORseries. Due to the variety of applications, we recommend contacting us.