CLAAS Brake Caliper for Combine Harvesters part no. 00 0776 476 3 Agrosikora

Hydraulic brake caliper for CLAAS combine harvester

Hydraulic brake caliper for CLAAS combine harvester(part no.00 0776 476 3) is a vital component of the braking system, responsible for generating the friction force required to stop the vehicle. It works bypressing the brake pads against the disc or drum, allowing for control over the driving speed and effective, safe braking of the machine.The CLAAS brake caliperis hydraulically actuated and operates under high pressure, ensuring precise performance even in difficult field conditions.

Location of the brake caliper in a CLAAS combine harvester

The CLAAS brake caliperis mounted directly at the machine's drive wheels. It is most commonly located:

• On the rear drive axle – in systems with classic 2WD drive,
• On the front axle – in versions with 4WD hydrostatic drive,
• Near the hubs or final drives – where it may be connected to the drive transmission system.

Each driven wheel usually has its ownCLAAS brake caliper, enabling independent and effective control of the entire machine's braking.

Application and functions of the CLAAS brake caliper

The main task performed bythe CLAAS hydraulic brake caliper, is to ensuresafe brakingand control over the combine harvester's driving speed in various operating conditions – both during field work and transport driving.

Key functions:

• Generating braking force– mechanical pressure of the pads against the friction surface (disc/drum).
• Precise speed control– enables accurate control of the machine's deceleration.
• Improving safety levels– prevents uncontrolled rolling of the vehicle or collisions.
• Load resistance– a component adapted for work in conditions of high dust, high temperatures, and cyclic overloads.

Application of the brake caliper in CLAAS combine harvester models

Part number00 0776 476 3is assigned tothe brake caliperused in various CLAAS combine models. Based on the design and typical applications, this part likely fits:

• CLAAS LEXION– in the 500, 600, 700 series, depending on the type of running gear and braking version.
• CLAAS TUCANO– in selected models from the 400 and 500 series, where hydraulic brakes are used.
• CLAAS AVERO / TRION– possible application also in newer generations of CLAAS combine harvesters.

Due to various applications, we recommend you contact us.